Features of No-frost (without frost) Evaporator Manufacturing:

1. All manufacturing stages are mechanized and performed by advanced European devices.
2. Flexibility in designing and manufacturing the various types of evaporators in terms of general dimensions, fin arrangement, size of the accumulator, joint and drain water tray, diameter, and length of inlet and outlet pipes.
3. Having advanced progressive mold that able to produce aluminum fin in different sizes
4. Utilizing the special alloy of aluminum sheet to manufacture fin and side plates of the evaporator, these sheets have polished surface with appropriate dew point granulation for the fast dropping of droplets from fin surfaces
5. Using the high-quality aluminum European pipe, considering to following advantages:

• Uniform diameter and thickness of pipe wall at the entire coil
• conformity the pipe alloy and standard No-frost evaporator (special for Amensanat)
• Assuring the no leakage in the pipe (based on nitrogen inside the pipe and sealing it.
• Better function in all stages of manufacturing (bending, joint, argon welding, etc.)
• Minimum waste resulted in no leakage at the helium test stage

6. Automatic expanding system for evaporator:

• daily production capacity at least 3000 evaporators in one working shift
• intense and integrated linkage between fin and pipe to the highest refrigerating efficiency
• uniform the internal thickness and diameter of pipe through the evaporator path
• ability to change the density of fins for desire refrigerating distribution at different points of evaporator through varied fins arrangement

7. connecting the copper pipe to aluminum pipe (joint) by the most advanced welding machine in the world with characteristics as follows:
8. intense and high-quality connection
9. high résistance to shrinkage and expansion
10. fully automatic washing the evaporators with specific materials to remove the surface pollutions from the product
11. making to melt the aluminum at standard temperature
12. maximum adhesion of aluminum pipe to copper one
13. utilizing the automatic welding machines with argon gas made by Denmark
14. using the two-layer adhesive thermal shiring tube in joint point of copper to aluminum for protecting and preventing the galvanic corrosion in a long time
15. capability to install aluminum drain water trays at various sizes.